About the Blog

Educating fellow Jews about the sporting and defensive use of firearms. Especially Jews in North America, too many of whom are instilled with the belief that guns aren't for nice Jewish boys and girls.

If you know of notable Jewish shooters that should be documented on the blog, even if it is only at the local club level, I am happy to report and profile them. And don't be shy if that person to be documented is you! Please drop me a line at jewishmarksman at gmail dot com. Also follow me on twitter @JMarksmanship.

Monday, June 18, 2012

Tweaking a Load for the Israeli Mauser - OAL

Now that I have a fairly decent 100 yard zero for the Israeli Mauser, it's time to develop a load that will tighten up the groups.  One of the first things I want to do is determine the OAL (overall-length) of a bullet seated into the lands, and then back off of that number by about .020 or .015" or so. So what does this mean, and why might it help the Israeli Mauser shoot more consistently?

OAL (overall-length) is the length of a loaded cartridge, measured from the base of the cartridge to the tip of the bullet.  Experience has taught rifle shooters that significant accuracy gains can be had by playing with this measurement.  Some say best accuracy arrives from seating the bullets so that they just touch the lands (the part of the chamber where the rifling of the barrel begins).  Some say say to back off from that distance .020 to .040 through trial and error.  Some get accuracy gains by jamming the bullet slightly into the lands.  In any case, .020 off the lands is a good place to start.  The reasons for this gain in performance are argued and debated, with several competing theories, although nobody argues that it usually works.

The trick is to measure the OAL for a bullet touching the lands.  Every bullet style is different, and every rifle's chamber is cut a little different, and wears a little different over time.  There are a number of techniques for arriving at this measurement, but the easiest is to use the Hornady OAL gauge with a modified case.  Essentially, on the end of the gauge is a modified case with a wide mouth so that a bullet can slide in and out. At the other end of the gauge is a rod you push to advance the bullet, and knob to lock the rod once you feel the bullet touch the lands.  You put the gauge in your rifle's chamber, push the bullet forward until you feel it touch the lands, lock the rod, then measure.  Simple.  Use several bullets from your lot for a decent sample size, and use a bullet comparator to measure off the ogive, and you get a very good idea of how long you can seat a particular brand of bullet in your rifle in order to touch the lands.  All you need do then is adjust your bullet seating die to back off of that number as appropriate, and experiment from there.
(NOTE: this information is for experienced hand loaders...seating bullets into the lands will significantly raise chamber pressures and powder levels must be adjusted accordingly!)

So in the case of 155gr. (Sierra Match Kings) bullets I'm using in the Israeli Mauser, although the bullet manufacturer suggests 2.775 as the OAL, the bullets actually touch the lands at approximately 2.816+/-.001 based on my measurements (2.232+/-.001 with a comparator).  Thus, I will try loading at 2.796 (roughly .021 longer than the manufacturer's recommendation).  








4 comments:

  1. Get a Sinclair OAL tool. Look up Sinclair International. It's better than the Hornady/Stoney Point tool. It is more repeatable, and easier to use.
    Mike

    ReplyDelete
  2. What powder & powder weight are you using?

    ReplyDelete
  3. USE AT YOUR OWN RISK:

    Still experimenting, currently 41.5 grains of IMR 4064, but have used 43gr.

    Lapua .308 Win Brass

    Wolf Large Rifle Primer

    2.795 oal., which is longer than Sierra recommends.

    155 gr. Sierra Match King

    Again use at your OWN RISK!

    ReplyDelete
  4. I would add that at 41.5gr., at 100 yards the holes are not clean, suggesting the bullet is not stabilized. This helps me in 100 yard matches by making a bigger hole, which has actually grabbed me a few points. But for longer distances I suspect 41.5gr. would disappoint.

    With 43 gr. the holes are clean and I feel the groups are a little tighter, and 43 would be necessary for longer range stability.

    I am planning to use 41.5gr for rapids and 43gr. for slow prone for that reason.

    I am also going to give 125 gr. bullets a try for rapids to cut down on recoil.

    Also remember my chamber is a new, modern .308 chamber, and I know my barrel's twist rate (1/11.5). I doubt there is much uniformity among the various Israeli mausers chambers and barrels. Probably a fast twist (1/10) rate for heavy 168gr. or higher bullets? Look on line and there are ways you can find your twist rate which will help you match a bullet.

    I guess what I'm saying is that on these rifles trial and error is probably your only hope to finding a good load.

    ReplyDelete